ES 8.2 Terra External Access for Apache (Using ISA Server)

Version B.05.07.061
052450

These installation instructions consist of two sections.

Create a New Destination Set
Create a New Web Publishing Rule

Note: Both sections of this installation guide are to be carried out on the following Windows 2000 Advanced Server servers in all three regions.

ES 8.2 ISA Configuration
Production — New Request	Project_Destination- Set_Web-Publishing-Rule	Redirect Address	SSL Port	Path	Destination Set Name/IP Range	Windows 2000 Server Name
Yes	ES 8.2 - Production - AM	service-enabler.atl.hp.com	1134	/es82/*	*	atwnt975.atl.hp.com
						atwnt976.atl.hp.com
	ES 8.2 - Production - EU	service-enabler.brussels.hp.com				eiabruss1.belgium.hp.com
						eiabruss2.belgium.hp.com
	ES 8.2 - Production - AP	service-enabler.sgp.hp.com				sgnxpd01.sgp.hp.com
						sgnxpd02.sgp.hp.com

Installation Notes:

• If printing, print in landscape mode only.

• Checks made in step checkboxes do not get saved once you close this document.
   

1.  Log in to the Windows 2000 Advanced Server Web Server using your own NT login.

2.  Click Start > Programs.

3.  Select Microsoft ISA Server.

4.  Select ISA Management.

5.  Expand the Server and Arrays branch.

6.  Referring to the above table, expand the <server_name> branch.

   Example:
   
       atwnt975.atl.hp.com

7.  Expand the Policy Elements branch.

8.  Select Destination Sets.

9.  Select Create a Destination Set in the right pane.

   Note: The New Destination Set dialog box appears.

10.  Enter <project_ destination-set_Web-publishing-rule> in the Name field.

        <project_destination-set_Web-publishing-rule>
    
    Example:
    
        ES 8.2 - Production - AM

11.  Click the Add button.

    Note: The Add/Edit Destination dialog box appears.

12.  Select the Destination radio button. 

13.  Enter * in the Destination field. 

        *

14.  Enter the <path> in the Path field.

    Example:
    
       /es82/*

15.  Click OK to close the Add/Edit Destination dialog box. 

16.  Click OK to close the New Destination Set dialog box. 
    
    

1.  Expand the Publishing branch in the left pane.

2.  Select Web Publishing Rules.

3.  Select Create a Web Publishing Rule in the right pane.

   Note: The New Web Publishing Rule Wizard starts.

4.  Enter <project_destination-set_Web-publishing- rule> in the Web publishing rule name field, then click Next.

       <project_destination-set_Web-publishing-rule>
   
   Example:
   
       ES 8.2 - Production - AM

5.  Select Specified destination set in the Apply this rule to dropdown list box, then click Next.

6.  Select <project_destination-set_Web-publishing-rule> in the Name dropdown list box, then click Next.

       <project_destination-set_Web-publishing-rule>
   
   Example:
   
       ES 8.2 - Production - AM

7.  Select the Any request radio button, then click Next.

8.  Select the Redirect the request to this internal Web server (name or IP address) radio button.

9.  Referring to the above table for the correct regional entry, enter the <redirect_address> in the field immediately below the radio button in the previous step. 

   Sample entry (for the AM region):
   
       service-enabler.atl.hp.com

10.  Enter the <SSL_port> value in the Connect to this port when bridging request as SSL field.

    Sample entry (for the AM region):
    
       1134

11.  Click Next. 

12.  Click Finish.

13.  Repeat all of these steps for each remaining Windows 2000 Advanced Server servers referenced in the table at the top of this document.